cgtrox

I know they make a few for Line 6 products just wanna make sure I get the right one! LOL!

Wow, thanks bro! I'll try it tomorrow, GOT is on, LOL!!

It's a 50W EVH 5150 III head and it does have a MIDI jack. Just got the HX Effects yesterday and was just wondering if anyone else has done anything similar with a 3 channel amp

Is it doable without using ANOTHER external box?

Exactly! Looks like I'm going with the HX Effects as well

Hi Phil, been a while! Yes, I see that as part of the bigger picture now. I just assumed it would do so as my M9 does it. Been out of the loop for a while and was originally shooting for the HX Effects which does all of what I was looking for. I was hooked by the smaller footprint of the Stomp as I am trying to keep it light for stage travel, oh well. For the record, I really love this little box!

Why does have MIDI ins and outs then? The world may never know...

All they need to do is update the software to include MIDI control so nobody has to use a third party MIDI controller. The whole purpose of purchasing the HX Stomp was to cut down on pedalboard real estate, at least for me it was. It's a great backup and it has potential to do so much more! If you look on the Ideascale thingy there's a request for this to vote on it

https://www.homedepot.com/p/Husky-12-in-Tool-Bag-82004N11/203224030?cm_mmc=Shopping%7CG%7CBase%7CPB%7C25-1_HAND+TOOLS%7CHusky%7CBT3%7c71700000009211386%7c58700000392471389%7c92700007591925698&ds_rl=1178140&gclid=EAIaIQobChMIyvHRhenQ4QIVB0TTCh2pFgtdEAQYASABEgLIdvD_BwE&gclsrc=aw.ds For $10 it's really tough to beat and it has an industrial zipper and strap. I use it for an HX Stomp, Mission pedal and a Crate Powerblock along with a few cords

Well, with a MIDI IN, OUT and THRU one would only think there would be a MIDI command capability in it! Oh well, sending this thing back... :(

Not really, I am running mine sitting on top of a 2x12 Marshall that has (2) 16ohm Celestions in it wired to be 8ohms so it runs all three speakers and it rocks!!

Try it without the (21) in the number, just start from the PD (assuming you have the POD 2.0?)

One thing to check is the speakers themselves, open the back to make sure the original speakers are in there. Physically grab each speaker by the magnet and see if they are loose at all. These cabs are rear loading so the next step is going to be a little more invasive. That same buzz happened to me and the culprit was a loose dust cap! The dust cap is the little dome in the center of each speaker that protects the voice coil. To check it you have to remove the speaker and inspect the seal around the dome to make sure it is intact all the way around! Also, check the seal around the edge of the speaker as well, but the dust cap is usually the answer,

Sounds like the old vibration problem. When you crank these combo amps they sound awesome but the Achilles heel is the knobs move ever so slightly which changes the volume and/or tone. Solution? Be sure to have the FBV plugged in to change channels, crank it up, then turn all of the knobs except the Presence and Master Volume to ZERO.Now change the channels using the footswitch. We call this "Zero Parking" Good luck, hope this helps!!

The SV's are great littie amps! I still use my 1x12 MKI with an SVPre as my main rig. I had an MKII but I gave it to my son, I think the MKI sounds better. Plus, there was no SVPre for the MKII until now! The MKI has the POD 2.0 amp sounds and the MKII has the old PODxt amp sounds. Now if Line 6 made a new amp with the amp sounds of the MKI, the effects of the MKII and had some kind of tube(s) in the preamp they would have a killer little amp!!! cgtrox B)